Construction of metal mosaic

Metal mosaic is a special high-grade and luxurious handmade mosaic, which is a kind of building decoration material. Metal mosaic can be said to be the interpretation of texture and the times. Various styles of metal mosaics can meet the multiple needs of customers. Next, let us talk about the construction of metal mosaics. Here are some answers.

Here is the content list:

• The current state of metal mosaics. 

• The construction process of metal mosaic. 

The current state of metal mosaics. 

The most intuitive understanding of metal mosaic is to replace the past tile mosaic material with metal material, which makes the texture stronger and has a strong self-style. It has attracted much attention once it is launched. And the colorful world spelled out by metal mosaics is full of luxury and avant-garde in its magnificence, dignity, and elegance, which can bring users a different sensory enjoyment and real experience. Nowadays, metal mosaics are widely used to decorate hotels, bars, villas, and other places.

The construction process of metal mosaic. 

First, the mosaic of any material should be clean and tidy before construction. Metal mosaic is no exception, and the requirements are more stringent, especially to check whether the wall is wet or cracked. Because the air permeability of metal mosaics is not as strong as that of tile mosaics, or even without air permeability, water vapor will always be stored in the wall. After a long time, the wall will become moldy. The metal mosaic on the surface will also cause the glue on the back to fall off due to moisture.

Second, after the inspection work is completed, it is necessary to prepare for paving. The first step is to determine the position of the metal mosaic on the wall to be paved, and then use a pencil box level to determine the line. In the second step, you can uncover the adhesive of the metal mosaic, and then paste it according to the position of the marking. At this time, be careful not to use force to avoid small-scale adjustments on uneven areas later. In the third step, after all the metal mosaics are laid out, you can use a ruler to gently flatten the surface, and you don't need to use force to avoid damaging the metal surface. In the fourth step, you can use a small rubber hammer to gently beat the surface of the metal mosaic to make the adhesive and the wall stick more firmly, especially at the edge. In the fifth step, the metal mosaic does not need to be seamed, so after the paving, just tear off the protective film on the surface of the metal mosaic, and then wipe it with a soft cloth. Special attention should be paid to the fact that to prevent chemical reactions, metal materials must not be cleaned with acidic and alkaline cleaning agents to prevent the surface of the metal mosaic from becoming black and rusty.

Third, after the metal mosaic is laid, it is best to seal the space for 48 hours. This period is the period when the adhesive is sticky. Therefore, do not spray the metal mosaic with water to avoid falling off due to poor adhesion.

Our official website is https://www.connfly-mosaic.com/. If you are in a related profession or are interested in our metal mosaic products, please feel free to contact us. We will wholeheartedly provide you with the best service, and we also believe that my high-quality products will satisfy you.