The construction process of Special-shaped mosaic

The special-shaped mosaic is not a single piece in our imagination, but a piece with a mesh behind it, just like the tiles we use, except that there are tiles with small particles on one piece. The construction process is: basic treatment → paving → jointing.

Here is the content list:

• Grassroots treatment

• Paving

• Jointing

• Maintenance and cleaning of special-shaped mosaic

Grassroots treatment

Before paving the special-shaped mosaic, a comprehensive wall cleaning should be done. The particularly smooth base layer needs to be "textured", and if necessary, sand the wall with sandpaper. Use a pencil to draw a central axis or another straight line that can determine the specific location on the wall, so that the irregular mosaics along the line will not be too different in the later stage. If there is a socket on the wall, turn off the power first, and then remove the socket shell first.

Paving

Use a trowel to spread the tile glue evenly on the wall in one direction, the thickness should be about 2mm. When paving special-shaped mosaic tiles, always check whether the width between the tiles and the tiles are equal. After the special-shaped mosaic tiles are pasted, tap the tiles with a rubber hammer. The glue can penetrate the gaps of each special-shaped mosaic through the hanging net on the back of the tiles to achieve a fixed effect.

Jointing

When jointing, you need to prepare a porcelain joint agent and water. Use a plastering knife to evenly fill each gap with the porcelain grout. The area of a squeegee can not exceed 2 square meters at most to ensure that all gaps are filled and there is no excess residue. Twenty minutes after the jointing is completed, gently wipe off the porcelain joint agent indicated by the special-shaped mosaic with a damp cloth to ensure that the surface is clean.

Maintenance and cleaning of special-shaped mosaic

a. Clean up after paving: When the bonding layer and jointing mortar are finally set, you can start to clean the surface of the special-shaped mosaic;

b. After all the walls have been paved, gently take out the floating sand left in the seams with a clean damp soft brush;

c. Sun exposure should be avoided just after the surface layer has been laid, and the room should be properly ventilated;

d. Daily maintenance can be wiped clean with clean water and cotton cloth with good water absorption. In addition, a neutral brightener can also be used to wipe, which will help the surface of the special-shaped mosaic to maintain its brightness.

e. General detergents can be used for cleaning, such as decontamination powder, washing powder, etc., heavy dirt can also be washed with toilet cleaner.

Our company is committed to making good special-shaped mosaic and using special-shaped mosaic to manufacture. To make consumers feel more at ease, we have explanations and answers in every product. If you are interested in a special-shaped mosaic, you can contact us on our website https://www.connfly-mosaic.com and look forward to working with you.